KERIF Price: See Chart Below
Restricted to Gov't orders only
NSN: 5855-01-539-0639

 
Phoenix Jr Intruder Features:

                  Trip Switch w/50' Trip Wire Bobbin

                  Common 9V Battery operation

                  Small, Lightweight, Waterproof and Durable

                  Easily implanted by one individual

                  Covert Marker for use with Night Vision

                  Combat tested technology

                  Magnetic Mounting base included

                  Weighs only 28 grams (1oz)

KNVIR-14T PN: 902511 - Infrared Beacon with Trip Wire

Phoenix Jr. IR Intruder Beacon w/Trip Switch    
A trip switch activated, covert intrusion detection signaling beacon PHOENIX JR. INTRUDER BEACON is used in conjunction with Night Vision devices (NVD) to detect and signal night movement along trails, roads and entry points. Using a GPS receiver for precise reference, several Phoenix Jr. Intruder Beacons may be accurately implanted for preplanned targeting. The Intruder Beacon flashes at a rate four times faster than the Phoenix Jr. thus differentiating it from the standard combat identification signal.

SETTING UP A NIGHT PERIMETER may include the implanting of tripwire activated markers. The Phoenix Jr. Intruder Beacon offers the perfect solution. Combat teams equipped with a GPS receiver can quickly implant and accurately document the location of the Intruder network. At night, one NVD equipped sentry can easily watch over the network. Once set up, the intruder systems do not drain any power from the battery until activated by the trip wire, maximizing the field longevity of the network. When a beacon is tripped the intruder is typically not aware of his problem until the first mortar round lands on the beacon’s position.

Rapid Flash Rate
THE PHOENIX JR. INFRARED INTRUDER BEACON is used in conjunction with Night Vision devices (NVD) to detect and signal night movement along trails, roads and entry points. The beacon’s outside finish is red, differentiating it from the more common Phoenix Junior, combat identification beacon, and has a flash rate that is four times faster that Phoenix Jr.

SUPPLIED ITEMS
Infrared Signaling Beacon w/Red casing
Trip switch module w/trip switch
Trip cord bobbin with winding cap built in
Fifty feet (50’) trip cord

Light Output Frequency :
Infra Red - 880 nm
Alternate frequencies available on request

SPECIFICATIONS
Weight: 1 ounce
Size: 1.5" x .625" H (38.09mm x 15.87mm)
Battery: Common 9 volt
Configuration: 3 Light Emitting Diodes (LED)
Coverage: 240 degrees x 360 degrees
Activation: Trip wire removed with the 9 Volt battery attached
Flash Repeat Cycle: .22 Seconds (Fixed)
Flash Duration: Programmable
Battery: Common 9 volt
Configuration: 3 Light Emitting Diodes (LED), 880nm
Coverage: 240 degrees x 360 degrees
 

Ordering Information
Phoenix Jr. Intruder Infrared Beacon (902511IR) 880nm NSN: 5855-01-539-0639
Phoenix Jr Intruder NV Green Training Model (902511G) 565nm
Phoenix Jr. Intruder Red Training Model (902511R) 640nm
Vehicle Auxiliary Power Supply (902611)
 

These Beacons are proudly manufactured in the USA

EXPORT LICENSE REQUIRED.
Infrared Beacons are ITAR Controlled and cannot be exported without written authorization from the US State Department

Home | Contact Us | About KERIF |  Export Regulations | How to Order

(702) 324-6463  /  (702) 869-8451 FAX  

sales@nitevis.com or kerifnightvision@earthlink.net