11911 Micro R-1 (4 MOA)

Aimpoint Rings, Mounts & Accessories

 

      Aimpoint Micro H-1 and R-1 - Micro H-1 & Micro R-1 the only difference is the color!

     Designed with the hunter in mind, these sights are the lightest red dot sights tough enough to bear the Aimpoint name. Small enough to be used anywhere that you cold put iron sights, these sights can be used on any type of firearm or archery equipment.
A lightweight rifle with an R-1 Micro mounted on it remains a lightweight rifle!
A hunting revolver with an R-1 Micro installed remains as easy to carry as with iron sights and is much quicker to aim.
On a bow, the parallax-free R-1 Micro eliminates the need for a peep, allowing you to shoot accurately in lower light. No matter what your mission, the size and weight of your equipment is a critical factor. With the Micro R-1, Aimpoint has introduced an aiming system that provides the performance of their full-sized sights in the smallest package possible.
 

Unique features of the Micro R-1

* Lightweight – 84 g without mount and 105 g with mount

* Integral Weaver-style base allows easy attachment

* ACET technology allows 50,000 hours of operation on one battery

* Available in 4 MOA (minutes of angle)

* Fully waterproof

* Patent pending mount is keyed to the sight body to absorb recoil

* Precision adjustment for windage and elevation: top of protective caps fits into holes on adjustment screws – no other tool required

* 12 settings for use in daylight and low light conditions

* Ideal for Rifles, Carbines, Shotguns, Submachine Guns, and Handguns

* Weighs only 3.7 oz with mount

* Unlimited Field Of View (FOV), Parallax Free, Unlimited Eye Relief

* 4 MOA Dot for Close Combat and Long Distance Engagement

* Four Night Vision Settings, Eight Daylight Settings

* Increased Aiming Confidence/Reduced Training Time & Ammunition

* Mount Base screws directly into the sight - No Rings Needed

* Mount Base is "Keyed" into the body to absorb recoil

* Improved Keyed Adjustment Caps require no tools or coin

* Submersible to 5 meters (15ft) and unaffected by extreme weather conditions

* Unequalled light transmission

* No hazardous materials used

* Mechanical Switch for speed and reliability

* No laser emission that could be harmful to your eyes or alert your position

* ACET Technology giving 50,000 hrs use on one battery

a) Extreme heat (moist or dry). No special procedures required.

b) Extreme cold might shorten battery life. It could also make the Rotary Switch (4) a little harder to turn than at normal temperatures.

c) Salt air. No special procedures required.

d) Sea spray, water, mud and snow. Ensure that Battery Cap (2) and the two Adjustment Caps (1) are tightened before exposing the Sight to sea spray, mud, snow or before immersing the sight in water. Tighten the 2 Adjustment Caps (1) by hand, and use the Tool (9B) to tighten the Battery Cap (2). Keep Lens Covers (8) closed when sight is not being used. Clean lenses with lens paper/cloth and wipe the sight dry as soon as possible after exposure to water, sea spray, mud or snow.

e) Dust storms and sand storms. Keep Lens Covers (8) closed when sight is not being used.

f) High altitudes. No special procedures required.

CAUTION: The lenses shall never be cleaned with fingers but with lens paper/cloth. If no lens paper/cloth available :

- To clear away debris (sand, grass etc): blow away the dirt.

- To clean lenses: mist up the lenses and clean them with a soft piece of cloth.

Aimpoint Micro-series sights are small, light and rugged Red Dot Sights developed for hunting, sport shooting, military and law enforcement applications. Aimpoint Red Dot sights are designed for the ”two eyes open” method of sighting, which greatly enhances situational awareness and target acquisition speed. Thanks to the parallax free design, the dot follows the movement of the user’s eye while remaining fixed on the target, eliminating any need for centering. Further, the Aimpoint sights allow for unlimited eye-relief. The Micro T-1 is compatible with 1st , 2nd and 3rd generation Night Vision devices, while the Micro H-1 and Micro R-1 are optimized for applications, which do not require Night Vision compatibility.

The new Micro-series sights are using the new Advanced Circuit Efficiency Technology, called ACET, which combines Aimpoint’s superior accuracy and ease of use with significantly lower power usage. With the Micro-series sights Aimpoint has introduced an aiming system that gives the performance of their full-sized sights in the smallest package possible.

The Micro Sight is designed for installation on most types of weapons, which have a MIL-Std 1913 Picatinny Rail or Weaver Rail.

Aimpoint red dot sights are manufactured with the greatest care and precision from the best materials and components available. They are designed for use in the real world, and can handle rough treatment and all imaginable weather conditions. With the variety of models available, there is an Aimpoint sight for virtually every type of firearm.

For a sight and a gun to function as a reliable unit year after year, it is important that the mounting is done professionally and the mounting rings and bases are of high quality. An important detail that is often overlooked is the fact that the mounts and rings must be precisely aligned for best performance with any optical sight. The new generation of Aimpoint sights incorporates a very generous range of adjustment, which allows the user to compensate for any misalignment between the barrel, action and mounting hardware.

Home | Contact Us | About KERIF |  Export Regulations | How to Order

(702) 324-6463  /  (702) 869-8451 FAX  

sales@nitevis.com or kerifnightvision@earthlink.net