NSN: 1240-01-411-1264 M68 Close Combat Sight (CCO)
* Compatible with every generation of Night Vision Devices
* Unlimited Field Of View (FOV) and Eye Relief
* Standard CQB sight for Special Forces worldwide
* Unequalled light transmission and increased aiming confidence
* Reduced training time and ammunition consumption
* No Laser Emissions that could be harmful to your eyes
* Submersible to 25 meters (80ft)
* No Radioactive Components or Hazardous Materials
* Unaffected by Extreme Temperatures
* 2 Year Warranty for Military and Law Enforcement
* 10 Year Warranty for Personal Use
* CET Technology giving up to 100,000 hours of use on one battery
10338 CompML2 Govt./LE - $Call
First introduced in 2000, nearly 300,000 CompM2 sights are now in use by many Armed Forces including elite Special Forces around the world. The CompM2, also known as the M68/CCO (when used by US forces), is the standard sight for the U.S. Army and U.S. Air Force as well as the armed forces of many NATO countries. Due to its compatibility with all generations of night vision device (NVD), the CompM2 is ready for use around the clock. The CompM2 holds up under the roughest physical handling and can withstand the most severe weather conditions and temperatures. In fact, the CompM2 is completely submersible and will withstand pressures up to 2,5 atmospheres allowing it to be taken up to 25 meters underwater. When the CompM2 was released, it became the benchmark against which all other combat optics are measured. While primary utilized by armed forces, hunters and sport shooters who want a professional grade sight can also use the CompM2.
The successful CompM2 & CompML2 family of red dot sights and mounting systems for small caliber firearms such as pistols submachine guns and assault rifles have set a new standard for advanced sighting systems.
Specially modified variants of the CompC designed to meet military requirements; these sights are used by many armies and Special Forces around the world.
This sight has a special hard-anodized surface and the specification for water tightness is equivalent to a depth of 75 feet. The high quality requirements are designed to cope with frequent professional use on those types of guns that are typically used by the police and the military or for hunting under extreme conditions.
The CompM2 is compatible with Night Vision Devices (NVD) but is otherwise identical in construction to the CompML2.
*There is no “off” position necessary on the CompM2 as the battery life at the lowest setting is more than 10 years.
Aimpoint red dot sights are manufactured with the greatest care and
precision from the best materials and components available. They are
designed for use in the real world, and can handle rough treatment and
all imaginable weather conditions. With the variety of models available,
there is an Aimpoint sight for virtually every type of firearm.
For a sight and a gun to function as a reliable unit year after year, it is important that the mounting is done professionally and the mounting rings and bases are of high quality. An important detail that is often overlooked is the fact that the mounts and rings must be precisely aligned for best performance with any optical sight. The new generation of Aimpoint sights incorporates a very generous range of adjustment, which allows the user to compensate for any misalignment between the barrel, action and mounting hardware.
|Short Action Rifle
|Standard Length Rifle
|Parallax Free, Reflex Collimator System
|Unlimited, No centering required
|Red dot, diameter 4 MOA*, LED totally Eye Safe
|Anti Reflex coating on all surfaces. Multi-layer coating for reflection of red light.
|(1) 3V Lithium, 2L76 or DL1/3N
|Battery Life, typical**
|1,000 - 10,000 hrs avg., Night Vision (NV) Position up to 100,000 hours
|10 positions, (4) Night Vision, (5) Daylight, (1) X-Bright, Mechanical Switch
|Extruded Aircraft Aluminum
|Hard Anodized, Matte, Carbon Black
|Thermoplastic Elastomer, Blk, Non-glare
|1 click = 10 mm at 80 meters = 13 mm at 100 meters = .5" at 100 yds
|1 ring, 30 mm or Aimpoint QR
|130 mm (5.1")
|55 mm (2.2")
|Max 30 mm (1.2")
|220 grams (7.8 oz)
|-45 deg C to +70 deg C (-50 deg F to +160 deg F)
|Submersible to 25 m (80ft) water depth
(Minute Of Angle) 1 MOA = 30 mm @ 100 meters = 1" @ 100 yards
The Wilcox Aimpoint Comp-M Mount is a unique mount that allows an operator to affix a Comp-M Sight to any weapon that has a Picatinny Rail System. For an added nighttime advantage, the Wilcox AN/PVS-14/18 NVG Weapon Mount, (sold separately, see TDS061) allows the operator to mount an AN/PVS-14 or 18 NVG in series, which can position the dot of the Aimpoint Comp-M Sight in the view of the NVG.
Export license/End-user certificate is required for this
The 3X Magnifying module is specially
designed for compatibility with Aimpoint® sights and for maximum
flexibility and increased performance in the field. The 3X Mag is a
revolutionary tool for military personnel, law enforcement, sport
shooters and hunters. When combined with Aimpoint’s patented Twist
Mount, the 3X Mag gives the user something never before possible – the
ability to switch in a split second from CQB (Close Quarters Battle) to
semi-sniping and vice versa. Hunters can rapidly switch from
non-magnifying to magnifying while still being able to keep their
Aimpoint® sight on their firearm. The versatile 3X Mag also can be used
as a handheld magnifying glass monocular for discrete observation and
(702) 324-6463 / (702) 869-8451 FAX