Prices change too often to list, please call.

3X Magnifier & Mount
 

Designed for compatibility with Aimpoint® sights and for maximum flexibility and increased performance in the field. The 3X Magnifier is a revolutionary tool for military personnel, law enforcement, sport shooters and hunters. When combined with Aimpoint’s patented Twist Mount, the 3X Magnifier gives the user something never before possible – the ability to switch in a split second from CQB (Close Quarters Battle) to semi-sniping and vice versa. Hunters can rapidly switch from non-magnifying to magnifying while still being able to keep their Aimpoint® sight on their firearm. The versatile 3XMag also can be used as a handheld magnifying glass monocular for discrete observation and identification.

 * Mountable on a rail system behind Aimpoint® sights

 * Extremely fast and ingenious mounting solution

 * Can also be mounted with a regular 30 mm ring

 * Provides extended range to the operator

 * Combines the best of two worlds – CQB & semi-sniping

 * Increases confidence, performance and flexibility

 * No influence on point of impact –– No need for re-zeroing

 * Doubles as handheld magnifying monocular

30mm Rings (Weaver or Picatinny)

Aimpoint Quick Release Mounts

ARMS#22M68 Throw Lever Quick Release

ARMS#22M68 Throw Lever Quick Release

Body & Lens Covers - OEM Replacements and Upgrades

Killflash, Threaded for All 30mm Comp 1X

OEM Replacement Battery Caps, Double Battery Module Upgrades

All Aimpoint Products & Accessories sorted by Part Number

Export license/End-user certificate is required for this product.
The Aimpoint® LPI, IR Laser Aiming Device is an active aiming device or target
designator for military and Law Enforcement applications in darkness or poor
light conditions. It is a development based on long experience in engineering
and manufacturing of lasers ranging from pistol to military infantry rifle applications.
The Aimpoint LPI is intended as a complement to the passive aiming systems.

It is designed to fit directly on an Aimpoint red dot sight, which means that no special rail system is required.
This is a truly unique tool, lightweight, small and sturdy. It enhances the red dot sight capability and meets
the increasing demands on target lasers. The combination provides a choice to select the best sight to suit all conditions.
This is the smallest military IR laser aiming device with a slim design and it meets all military demands.
The desired wavelength insert can be selected from a range of basic laser sources.
The insert can be adjusted in X and Y axis independently of the red dot sight.

BATTERY FOR AIMPOINT® SIGHTS
The following battery types should be used in the different Aimpoint® Sight models
There are 3 groups of products using different battery types.
Please look for your product in one of the groups listed below:

Alternative:
The following alternative is not valid for the following models: 7000-serie, CompC-series, CompM2 and CompML2.

In all sights where DL1/3N or 2L76 are the primary battery types, these batteries can be replaced with 2 pcs of a 1.5-volt battery of the following marks and manufacturers. Each battery has a size of Ø11.6 x 5.4-mm.

Manufacturer Alkaline Silver Oxide

IEC LR44 SR44
JIS LR44 G13/10L14
ANSI --- S15

Duracell LR44 D357
Panasonic LR44 SP357 (or older WL-14)
Varta V13GA V357

Ucar A76 357
Berec BLR44 B-SR44H
Philips A76 357

Ray-O-Vac RW82 RW42
Seiko --- SB-B9
Citizen --- 8
Renata --- 357

Home | Contact Us | About KERIF |  Export Regulations | How to Order

(702) 324-6463  /  (702) 869-8451 FAX  

sales@nitevis.com or kerifnightvision@earthlink.net