Where Top - Of - The - Line is on Top - Of - Our - Shelf  

Categories 

Home Page

Accessories

Aiming Systems

bullet

Aimpoint Red Dot

bullet

ELCAN Optical

bullet

EOTech

bullet

Laser Pointers

Beacons/Strobes

bullet

Guardian Beacons

bullet

9 Volt Series

bullet

VIP Visual Id Projector

bullet

Lazer Stiks

Binocular Day

bullet

Futurus

bullet

Yukon

Binoculars Night

bullet

BNVS-15

bullet

Dual Tube Systems

bullet

PVS-7's

bullet

5X PVS-7's

Combat ID

bullet

GloStiks

bullet

GloTape

bullet

GloTape Flags

bullet

TIP Panels

Goggles

bullet

Aviation Goggles

bullet

Gen 1, Gen 2

bullet

Gen 3

bullet

Pinnacle - Thin Film

Infrared Lighting

bullet

Aviation Mike Lights

bullet

Beacons - Strobes

bullet

Blocking Filters

bullet

Finger Lights

bullet

IR Spotlights

bullet

Vehicle Illuminators

Law Enforcement

Monoculars

bullet

Gen 1, Gen 2

bullet

Gen 3 Commercial

bullet

L-3 Thin Filmed

bullet

ITT Pinnacle Thin Film

bullet

Multi-Task Units

Mounts & Bases

bullet

A.R.M.S.

bullet

Aimpoint

Spotting Scopes

Stun Guns

Thermal Imagers

Truck Vaults

bullet

Bed Vaults

bullet

ConsoleVault™

bullet

Dog/K-9 Boxes

bullet

DU-HA Cab Storage

bullet

Extreme Series

bullet

Mobile Command

bullet

TrunkVaults

bullet

S & W Gun Safes

Weaponsights

bullet

Day/Night Units

bullet

Gen 1 & Gen 2

bullet

Gen 3

bullet

Multi-Task Units

bullet

NVRS Titanium

bullet

Raptor 4X & 6X

bullet

Multi-Task Units

bullet

Thermal

Helpful Info

About KERIF

 Contact Us

Definitions

 Export Regulations

FAQ's
How to Order
Terms & Conditions

Enhanced 36° x 27° FOV, f/1.4 Lens
Provides the powerful advantage of sight in the dark
Easily Mounts on existing vehicle spotlight
Monitor perimeters Night or Day of restricted facilities
Identify lost boaters or stray objects on the water
Observe prowlers and criminals without their knowledge
NTSC Video out for remote monitor or recording device
Quickly scan between buildings, alleys or even under vehicles

P/N: PSV-1000 MSRP List: $4,200.00
KERIF Price: ONLY $3,900.00
 
LE/Govt.: $Call for Discount

 

The NOPTIC is the one and only Spotlight Mount (patent pending) provides quick pan and tilt capabilities required for successful surveillance.


Cheap imitators that move slow, or are fixed mounted, just can’t deliver the results like a NOPTIC. The vehicle mounted thermal imaging camera enables you to conduct quick and easy Night Vision surveillance with its highly acclaimed panning and tilting capabilities. In addition, the ability to pan and tilt the camera, with the spotlight off, allows for the timely and tactical use of the spotlight.

Read other Testimonials and News Articles

Hand-held Thermal Imaging devices can spend most of their time in the trunk or back at the office, but the NOPTIC is at work all night, every night, Since the camera uses passive infrared sensing technology, it is not affected by oncoming headlights.  The camera operates in complete darkness and at temperature extremes of  – 40°F to 176°F. It also has a built-in lens heater that activates automatically at temperatures below 40°F to keep the lens clear of frost and ice.
Police try out thermal imaging       If you run they will find you         Fighting The War On "Meth"

FUNCTIONAL OVERVIEW
 

The NOPTIC PSV-1000 is the newest addition to KERIF Night Vision's family of infrared Thermal Imaging Systems. Smaller than the now discontinued Thermal-Eye 5000xp, and almost every other Thermal Imager on the market, in addition to design accommodations, the NOPTIC is able to withstand the harsher environments of marine applications.

The NOPTIC contains the infrared sensor and the captured infrared scene, now converted to a real-time black/white video signal, is available to send from the NTSC RCA output. For existing monitor systems, an optional RCA to USB capture device is available. Stand alone systems require RCA cable & Video Monitor or Recorder. The control module has a universal RCA jack for video output. Due to the many different cable connectors used in the various video systems on the market, you will need to determine and obtain the specific video input connector required for your video system.

INFRARED IMAGING AND APPLICATIONS  
Visible light, the rainbow of colors that can be sensed by the human eye, is electromagnetic radiation within a certain frequency band. 'Infra-' means 'below' and 'red' is the lowest frequency in the visible spectrum. Hence, 'infrared' (or 'IR') refers to that range of electromagnetic wavelengths just below that capable of sight by the human eye. In the IR range, energy from a scene is not sensed by sight (light) but rather by temperature.

INFRARED IMAGING AND APPLICATIONS  
     Visible light, the rainbow of colors that can be sensed by the human eye, is electromagnetic radiation within a certain frequency band. 'Infra-' means 'below' and 'red' is the lowest frequency in the visible spectrum. Hence, 'infrared' (or 'IR') refers to that range of electromagnetic wavelengths just below that capable of sight by the human eye. In the IR range, energy from a scene is not sensed by sight (light) but rather by temperature.

     Most objects that you see are not radiating visible light but instead, are reflecting light radiated from another source. Most objects have to be heated to extreme temperatures before they radiate energy in the visible light spectrum. However, energy in the infrared range is being radiated by all objects that are above absolute zero (-459F). Hence, everything has a thermal signature, regardless of light conditions.

The NOPTIC PSV-1000 infrared detecting system distinguishes between very small differences in thermal (infrared) radiation, converts it to electrical signals, amplifies those differences, and reproduces them correspondingly in the visible light (video) range. Powerful advantages are achieved in being able to turn a pitch black night into a black and white TV image of the scene. As your infrared knowledge and experience grows, further applications will develop as you recognize heat clues beyond the naked eye in both day and night conditions.

Some advantages and success stories that can be achieved thru application of your PSV-1000 are:

SAFETY

* See without being seen. Allows stealth surveillance and approach from within safety of vehicle.

* Element of surprise gives better situational control. Reduces opportunity for suspect flight and high speed chases.

* Night viewing by sight requires flashlights and searchlights which reveals the pursuer's position, giving advantage to the suspect who wants to stay hidden or surprise attack.
* Infrared viewing allows safer search capability while the suspect remains 'in the dark' until you are ready to illuminate them with your spotlight.

* In search and rescue, seconds count. Missing or injured persons can be located before lengthy search deployments are required.

* Docks, piers, boats, and other obstacles can all present dangerous hazards to marine navigation especially at night or in fog.

EFFICIENCY
* With the PSV-1000, these objects are clearly visible against the uniform temperature of the surrounding water.

* Infrared won't 'bloom' or become blinded when hit with bright light such as headlights.

* Wide areas can be scanned to 'clear an area', establish a perimeter or more quickly locate a missing person or "man-overboard".

* An area can be brought under control in less time.

* Manpower and equipment resources are saved by reducing the need for foot patrol, K-9, helicopter, and flashlight expenses.

* Warmth on a car's engine compartment or tires yields evidence of when it was last driven.

* A hot car hidden in a cold parking lot stands out.
* Also, a suspect vehicle that is cold might be considered abandoned, reducing the chance and need to wait for his return.

* Buoys and markers are easily "seen", even in pitch black or poor weather, allowing for efficient navigation.

 

EFFECTIVENESS
* While light reflects off of foliage, infrared from a person behind a bush is radiated through the foliage, allowing better detection in both day and night conditions.

* Tossed weapons and contraband are thermally evident against cold ground.

* Accident investigations yield heat clues in latent tire tracks and skid marks, unseen by sight.

* IR reflects off windows, metal structures, smooth concrete walls, and other opaque surfaces providing a mirroring ability around corners in day or night.

* Air gaps and surfaces touching each other can give heat clues as to hidden compartments, fluid levels, etc.

* Infrared is less prone to scattering and absorption by smoke, dust, and fog.
 

Side by Side Comparison Thermal-Eye 5000xp Noptic Technical Specs
IR Focal Plane Array, Type & Material  Uncooled Ferroelectric, Barium Strontium Titanate (BST) Uncooled Microbolometer, Vanadium Oxide (VoX)
Resolution/Pitch  320 x 240 / 48.5μm  320 x 240 / 25μm
Spectral Response  7-14μm  8-14μm
Window Type  Silicon with durable hard carbon exterior coating Germanium with durable hard carbon exterior coating
Start-up Time  ~ 45 seconds 2 seconds
Contrast/Brightness  Fully Automatic  Fully Automatic
Range to Detect Human Activity  Man-sized target at 1500ft (450m) depending on object size and contrast Man-sized target at 1000ft (300m) depending on object size and contrast
Thermal Sensitivity not specified < 100mK NEdT
Optics Field of View (f/#)  24° x 18° (f/1.0)  36° x 27° (f/1.4)
Focus Method Fixed (Auto-Compensated for temp variations) Fixed (Auto-Compensated for temp variations)
Aperture f/1.0 f/1.1
Output Format NTSC Compatible NTSC Compatible Frame Rate: Std. 30Hz (International 9Hz Models)
IR Polarity  White Hot White Hot
Power Input Voltage  9.5 to 16VDC 9-16V (operating range), Protected against over voltage, jump start, reverse battery
Power Consumption not specified 2 Watts
Environmental
Operating Temperature  -40°C to 55°C  -40°to 80°C, Functional to 12,000' @ +185°F
Storage Temperature  not specified -65°F to +200°F (non-operating range)
Water Resistance  IEC level IPX6 (Not submersible) IEC level IP67/69
(High pressure spray, and submersible)
Window Heater N/A Activates automatically at temperatures below 40°F to prevent ice formation
EMI/EMC  FCC Part 15 Compliant Camera is Automotive OEM compliant (which is more stringent than FCC Part 15 Compliant)

 

NOPTIC Infrared Focal Plane Array
Type & Material Passive IR uncooled Microbolometer
Resolution/Pitch 320 x 240 /25 μm
Spectral Response 8 - 14μm
Window Type Germanium w/durable hard carbon exterior coating
Thermal Imaging Performance
Start-Up Time ~ 2 seconds*Note 1
Contrast/Brightness Fully Automatic
Detection Range Man-Sized Target at 1000ft (300m)
Input Voltage 9 to 16 VDC Protected against over voltage,
jump start, reverse battery
Power Consumption ≤ 2W (Nominal)
Optics
Field of View 36° x 27° (f/1.4)
Min. Focus Distance ~ 25ft (8m)
Focus Method Fixed, Automatically Compensates for Temperature Variations
Aperature f/1.1
Infrared Video
Output Format NTSC Compatible Frame Rate: 30Hz or 9Hz (to be specified by part number)
IR Polarity White Hot
Pan/Tilt Functions
Pan Travel
Tilt Travel (Horizontal)
Full rotational movement controlled by normal spotlight manipulation
Pan Rate (Nominal) Manual
Tilt Rate (Nominal) Manual
DIMENSIONS
Length
Width
Height
Weight
2.9" (72mm)
2.3" (58mm)
2.2" (56mm)
Less than 1 lb
ENVIRONMENTAL DATA
Temperature Range -40°C to +80°C (-40°F to +175°F)
Max Storage Temp. -54°C to +94°C (-65°F to +200°F)
Functional Altitude
Storage Altitude
Functional up to 12,000 ft @ +185°F
Storage up to 39,000 ft @ -65°F
Water Resistance IEC level IP67/69, High pressure spray, Submersible
EMI/EMC Exceeds FCC Part 15 Compliancy*Note 2
Optional Part Numbers
PSV-1000-USB USB Cable Interface Cable w/Video Capture Software

NOTE 1: Video not present during the first 2 seconds after system turn on.

NOTE 2: (FCC Compliance) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Theft and Vandalism Deterrence

The NOPTIC PSV-1000 method of installation was designed to provide easy, external mounting on existing spotlight hardware. 

Storage

NOPTIC PSV-1000 can be stored at temperatures up to 200°F (94°C).

Power

The NOPTIC PSV-1000 requires a power source between 9 to 16VDC that is capable of delivering at least 3 amps (12VDC is nominal). NOPTIC PSV-1000 is designed for use with a negative ground system. Improper connection could result in equipment damage.

Servicing

Do not attempt to service the NOPTIC PSV-1000 system as it may void the warranty. The NOPTIC PSV-1000 is not intended or warranted for the following environmental conditions.

RESTRICTIONS OF USE

bulletRepeated exposure and operation in sand or other abrasive grit.
bulletMounting orientations other than upright for the Pan/Tilt Camera.
bulletHigh vibration or shock beyond that of typical on-road, off-road, or sea-faring vessel conditions.
bulletOutdoor exposure to the elements for the Electronics Module.
bulletApplications that subject front of Pan/Tilt Camera to oncoming debris capable of breaking the front optics such as rocks and low hanging branches. (See 'Debris Protection' feature in Care and Maintenance section).


Installation of the NOPTIC system is straight-forward. Utilizing the installation instructions included with your NOPTIC shipment, simply remove your existing post mount spotlight head and replace it with the NOPTIC camera /spotlight head assembly. The systems wiring can then be routed as noted in the Installation procedure. Your local fleet installer can also provide other options for wire routing in the vehicle depending on your particular viewing application. See your Video System Operating Manual to determine connector type and for ordering information on the compatible cable required with the RCA output jack on the controller.

HYPERMEDIA software download. Note: For customers who use the K-World USB capture device for displaying the NOPTIC image on their vehicle computers. K-world has recently changed the software they provide in the package. You need the "HYPERMEDIA" software to properly display the image on your screen. Contact KERIF Night Vision for a download of this software. The Installation Drivers that come with the package, and the HYPERMEDIA software, is all that you need to display the NOPTIC image on your computer.

Home | Contact Us | About KERIF Export Regulations | How to Order

KERIF Night Vision
(702) 324-6463  /  (702) 869-8451 FAX  

sales@nitevis.com or kerifnightvision@earthlink.net