Please Call (702) 324-6463 or email sales@nitevis.com

Categories 

Home Page

 

Accessories

bullet

Bed Vaults

bullet

Console Vaults

bullet

Gun Vaults

bullet

Flashlights

bullet

PVS-7 Parts

bullet

PVS-14 Parts

bullet

Scopecoat Covers

bullet

Stun Guns

bullet

SureFire Lights

bullet

TruckVault\'s

bullet

Wilcox Products

Aiming Systems

bullet

Aimpoint Red Dot

bullet

Doctor Optic MRD

bullet

ELCAN Optical

bullet

EOTech Sights

bullet

LASER\'s

bullet

NV Weaponsights

Beacons/Markers

bullet

GloWands

bullet

Guardians

bullet

Lazer Stiks

bullet

Pegasus

bullet

Phoenix

bullet

VIP Visual/IR

bullet

9 Volt Series

NV Binoculars

bullet

AN/PVS-15 M953

bullet

AN/PVS-31 BNVD

bullet

ANVIS-6/9 M949

bullet

BMNVD

bullet

BNVD

bullet

BNVS-15

bullet

BTS Thermal

bullet

GPNVG

bullet

G15

bullet

PVS-7B/D

bullet

SENTINEL

bullet

STEINER Binoculars

Combat ID

bullet

Beacons-Markers

bullet

IFF-67 Blood Markers

bullet

IFF-980H SCHIMS

bullet

IR-US Flags

bullet

Vehicle CIDV Panels

bullet

Warrior GloTape

Goggle Main

bullet

ANVIS Goggles

bullet

AN/PVS-7B/D

bullet

AN/PVS-14B/D

bullet

AN/PVS-15

bullet

ATN G15

bullet

ATN NVG7

bullet

ATN PVS7

bullet

ATN PS15

bullet

BNVD

bullet

ENVG Fusion

bullet

SENVG Fusion

bullet

SENTINEL BNVS

Infrared Lighting

bullet

Aviation Lip Lights

bullet

Beacons/Strobes

bullet

Blocking Filters

bullet

Finger Lights

bullet

Flashlights

bullet

LASER Illuminators

bullet

Spotlights

bullet

Vehicle Lights

LASER\'s

bullet

AR-2A

bullet

ATPIAL

bullet

ATPIAL-C

bullet

CQBL-1

bullet

DBAL-A2

bullet

DBAL-A3

bullet

DBAL-A4

bullet

DBAL-D2

bullet

DBAL-I2

bullet

DBAL-PL

bullet

DBAL-RL

bullet

ITAL-Classic

bullet

OTAL-A

bullet

OTAL-Classic

bullet

SBAL-PL

bullet

SBAL-RL

Monoculars

bullet

AN/PVS-14B/D

bullet

AN/PVS-18 M983

bullet

GT14

bullet

DSNVG Fusion

bullet

ENVIS M703

bullet

Gen 1, Gen 2

bullet

LRS Surveillance

bullet

MICRO-Monocular

bullet

Mini-Monocular

bullet

Odin Thermal

Mounts & Bases

bullet

A.R.M.S.

bullet

Aimpoint

bullet

ELCAN

bullet

Wilcox

Thermal Imagers

bullet

BTS Thermal

bullet

DSNVG Fusion

bullet

Odin Imagers

bullet

OTS Imagers

bullet

NV3 NOPTIC Spotlight

bullet

THoR Thermal

bullet

Thermal-Eye X320

bullet

Thermal-Eye X640

Truck Vaults

 

 

 

bullet

Bed Vaults™

bullet

ConsoleVault™

bullet

Dog/K-9 Boxes

bullet

Extreme Series

bullet

Mobile Command

bullet

S&W Gun Safes

bullet

TrunkVaults™

Weaponsights

bullet

Aimpoint Red Dot

bullet

ATN Odin

bullet

ATN ThOR

bullet

BNS/BNS-LR

bullet

CNVD-T

bullet

CNVD-T3

bullet

Day/Night Scope

bullet

ELCAN Optical

bullet

EOTech HOLOgraphic

bullet

FLIR ThermoSight

bullet

FLIR T70 ACTS-SR

bullet

FLIR T75 ACTS-LR

bullet

FLIR T-90 TaNS

bullet

IR Hunter MK II

bullet

IR Hunter MK III

bullet

M2124 CNVD

bullet

PVS-4 | TVS-5

bullet

PAS-13G LTWS

bullet

PVS-22 Clip-On

bullet

PVS-27 MUNS

bullet

PVS-30-KAC

bullet

STEINER Scopes

bullet

US Optics

bullet

Zero Lens

Helpful Info

About KERIF

 Contact Us

Definitions

 Export Regulations
FAQ\'s

How to Order
Terms & Conditions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

  orderOnlineHelp

 

 

 

MR-10 1.8-10X

     

                                                                        

The MR-10 series stands out when a scope has to be versatile and highly effective at both extremes of its magnification range. A 37mm objective lens sits in front of a Turret Parallax Adjustment Locator (TPAL) system guaranteeing the sharpest image resolution possible throughout the 1.8-10X power magnification range. Target acquisition for accurate shots are effortlessly made from near pointblank to 1,000+ yards with the MR-10. When weather and light conditions are less than optimal the 12-position illuminated reticle system provides yet another advantage for taking your best possible shot. All MR-10 optics feature an Erector Repositioning Elevation Knob (EREK) system that maximizes gross elevation travel adjustment for maximum elevation adjustment where traditional turrets leave off. MIL and MOA reticle options are available in the MR-10 product line.

Reliable adjustments and extreme durability make this scope a very effective tool in the field. MOA or MIL reticles allow you to use whichever unit of measure you desire. Optional finish colors available at an additional charge. Scope body, eye piece, objective housing and any and all other body parts are made with 6061-T6 aircraft aluminum and are then coated with a matte black type III hard anodizing. Duel elevation and windage rebound springs will insure decades of reliable and accurate adjustments

SPECIFICATIONS
Name MR - 10
Length 13in
Weight 1.50 lbs.
Magnification 1.8X - 10X
Eye Relief mm/3.5 inches
Base Color Matte Black Type III Hard Anodizing
Base Objective 37mm
Base Knob Windage US#1 1/4 MOA Slimline
Base Parallax FIXED - Standard
Base Knob Elevation US#1 1/4 MOA Slimline
Base Tube 30mm Standard
Base Reticle MOA Scale TYPE 1  - Mil-Dot
Base Eyepiece Housing Low Profile - Rapid Focus
Base Eyepiece Rapid Focus
Field-Of-View (ft @ 100 yards) 41.6 - 12.8
Objective Lens (in) 37mm
Elevation Range (MOA) 70+
Elevation Range (MILS) 22.5
Windage Range (MOA) 39L/39R
Windage Range (MILS) 11L/11R
Other
Upgrade No
Area of Travel (MOA) 30mm = 85

Matte Black type III is the hardest scope coating in the industry it is scratch proof and chemical proof. This coating can with stand severe abuse, salt fog tests have been conducted internally and externally by outside military testing. Sulfuric acid is the most widely used solution to produce anodized coating, while coatings thicker than 25 μm (0.001") are known as Type III, hardcoat, hard anodizing, or engineered anodizing. Standards for thick sulfuric anodizing are given by MIL-A-8625 Type III, AMS 2469, BS 5599, BS EN 2536 and the obsolete AMS 2468 and DEF STAN 03-26/1.The Matte Black finish is matte black dye.

 

Matte Black Type III Hard Anodizing
(Default)

 

Cerakote Titanium*

 

Cerakote Coyote Tan*

Cerakote Tungsten*

Cerakote Forest Green*

Cerakote Nut Brown*

Cerakote MIL-Spec Green*

Cerakote Flat Dark Earth*

Cerakote FS Brown Sand*

 

* Note:  This extends the build time by 2 months

Cerakote coatings are formulated for specific applications and technical requirements. Current Cerakote product lines include coatings specifically for firearms, exhaust systems, pistons and high wear applications. In addition, Cerakote is available in a line of ceramic clear coats. If you want to match the color of your scope to your rifle or any other gear, Cerakote is the product for you.

     (Buy This Separately)

 

Accessories:

Sunshade

When you are shooting towards the direction of the sun, and direct sunlight is entering the objective lens, simply screw on the sunshade for improved resolution.

 

 

 

Unlike other scope companies, U.S. Optics allows the customer to customize their scope down to even the color. Whether it is a different color Type III Hard Anodize, or a Cerakote color, we can match the look of your rifle/gear on the scope. Because we are building all the scopes in house, we don\'t need to mask off the crucial parts, we coat each part before the scope is assembled for a high quality job.

 

Matte Black type III is the hardest scope coating in the industry it is scratch proof and chemical proof. This coating can with stand severe abuse, salt fog tests have been conducted internally and externally by outside military testing. Sulfuric acid is the most widely used solution to produce anodized coating, while coatings thicker than 25 μm (0.001") are known as Type III, hardcoat, hard anodizing, or engineered anodizing. Standards for thick sulfuric anodizing are given by MIL-A-8625 Type III, AMS 2469, BS 5599, BS EN 2536 and the obsolete AMS 2468 and DEF STAN 03-26/1.The Matte Black finish is matte black dye.

 

Cerakote coatings are formulated for specific applications and technical requirements. Current Cerakote product lines include coatings specifically for firearms, exhaust systems, pistons and high wear applications. In addition, Cerakote is available in a line of ceramic clear coats. If you want to match the color of your scope to your rifle or any other gear, Cerakote is the product for you.

One of the most important parts of a rifle scope is the objective. The objective determines many qualities of the complete optical system. Magnification, exit pupil and light gathering are some of the most critical points. The larger the objective diameter, the more light will be gathered into the optical system. The smaller the objective, the smaller the exit pupil, and the longer the objective, the more magnification is gained.

Your reticle decision is one that will aid in many points of your scope. If you are choosing MIL, MOA or IPHY we have a reticle for you. Various reticle models have different ranging stadia, line thicknesses and design to aid the operator in hold off\'s, ranging and fine precision shot placement. If you don\'t see a reticle that suits your needs, contact us and we can design and build one exactly the way you want it.

Elevation knobs are one part of a scope that gets used a lot and having a repeatable, durable knob will provide many years of use. Whether you are using the EREK, #1 or #3, all knobs are made of stainless on stainless, or stainless on brass. Each knob is hand lapped to insure exact repeatability and accuracy. All knobs use an encapsulated tungsten ball with a stainless threaded housing so our technicians can adjust the tension for the perfect feel.

Your weapon doesn\'t have to be lonely and incapacitated during the extremes.  Accessorize it with our custom covers, bags and other great items.

 

Home | Contact Us | About KERIF Export Regulations | How to Order

KERIF Night Vision
(702) 324-6463  /  (702) 869-8451 FAX  

sales@nitevis.com or kerifnightvision@earthlink.net