The AN/PVS-30-KAC Knight Vision®  MIL Spec Clip-on Night Vision Weapon Sight, adds the latest high performance Gen 3 light intensification night vision to most rifles and day scopes. This product is appropriate for front line long range rifles. The Knight Vision® patented technology makes the AN/PVS-30 universal and assures the accuracy of your range-tested day scope boresight will not be degraded. When the AN/PVS-30 is added in front of your Day Scope, your existing optic, eye relief, and cheek weld are undisturbed.

The AN/PVS-22-KAC Knight Vision® UNS (Universal Night Sight) Clip-on Night Vision Weapon Sight adds light intensification Night Vision to most rifles and day scopes. This product uses the latest high performance Gen 3 image intensifier tube in a proven design, where the Catadioptric lens provides high performance light collection with an effective f/1.2 in a Read More...

    The M-2124 CNVD (AN/PVS-24 Style)  design improvements will show itself the first time you use it, as the M-2124 is based on the battle tested military nomenclature AN/PVS-24, extensively used by US Special Operations Forces to gain the advantage at night without sacrificing their existing Day Scopes.   Read more...

M2124-LR CNVD-LR (AN/PVS-27 Style)     The advanced design of the M-2124-LR CNVD-LR Long range Clip On Night Vision Device eliminates the typical requirement of removing a primary (day) sighting system since the CNVD-LR mounts in line with a standard day optical sight.  Read more...

The FLIR  AN/PVS-27 (MUNS) MilSight™ S135 Magnum Universal Night Sight™ is an incredibly powerful Clip-On Night Vision Weaponsight with an impressive detection range. Big brother to the AN/PVS-22 Universal Night Sight, it can be mounted in front of any bore-sighted daytime scope with magnification ranging from (1X - 20X) one to twenty power...Read more...

 The ATN PS-28 mounts in front of a daytime scope to enable nighttime operation. No shift of impact, no need to re-zero nor change of eye relief occurs. The ATN PS-28 uses the latest in image intensifier tube technology for outstanding resolution and performance.

AN/PAS-13G(V)1 PN: TWB-001-A3 or LTWS "Light" Thermal Weapon Sight or "Light TWS" utilizes market preferred Vanadium Oxide (VOx) Microbolometer thermal imaging technology... Read More...

FLIR T70 Advanced Combat Thermal Sight - Short Range SU-271/PAS ThermoSight is an uncooled Thermal Clip-On Weaponsight with an in-line low profile housing suitable for modern weaponry with flip-down or removable front sight posts.  The low profile works with current Rifle Combat Optics (RCO’s) and minimizes height above the rail.  The ACTS-SR provides scene clarity...
 

FLIR T75 Advanced Combat Thermal Sight - Long Range ThermoSight has been specifically designed and optimized for long range weapon platforms with an approximate 875 yard identification range.  The size and weight make it ideal for tactical small arms such as the FN SCAR-MK16/17, M4/M16, SR25 all the way up to M107 .50 BMG and similar platforms... Read more...
 

FLIR T90 TaNS The MilSight™ T90 TaNS^® (Tactical Night Sight^®) is a High-Resolution Clip-On Night Vision Device (CNVD) that mounts on any Picatinny (MIL-STD-1913) rail interface forward of an existing scope, adding night vision capabilities to daytime target acquisition platforms. Read more...

     The ATN TICO Thermal Clip-On gives your daytime scope thermal imaging capability in a matter of seconds. The ATN TICO-Series mounts in front of a daytime scope to enable thermal vision in day or nighttime operation. No shift of impact, no need to re-zero nor change of eye relief occurs. The ATN TICO-Series uses advanced thermal technology for outstanding resolution and performance. Precision optical alignment is essential for any front sight system to work properly. Therefore every ATN TICO-Series is individually tested and aligned to the highest tolerances to provide perfect alignment. Read more...

CQB-001-A7 CNVD-T™ (SU-232/PAS) L-3 Insight Technology\'s Clip-on Thermal Sight is a lightweight, multi-platform thermal imager, providing moving man-sized target detection performance over 500 meters. The CNVD-T can be weapon-mounted as a stand-alone night vision sight or in combination with existing day optics. Insight\'s CQB-001-A7 Thermal Night Vision Device CNVD-T\'s small size also makes it ideal for hand-held use...   Read more...

CT3-001-A3 Tan or CT3-001-A6 Black
L-3 Insight Technology\'s CNVD-T3 is a battery operated, weapon-mounted, thermal imaging device with an integrated digital camera. It may be used in conjunction with other optical sights, or as a handheld unit. It allows for observation, target identification, and target acquisition during the day or in adverse conditions such as light rain or snow, dry smoke, and low light to total darkness.  ...   Read more...
 

AN/PAS-13D(V)3 CS6000 This HTWS Crew Served Thermal Weapon Sight (CSTWS) or "Heavy TWS" utilizes market preferred Vanadium Oxide (VOx) Microbolometer thermal imaging technology, utilizing a hefty 103mm lens and boasts an impressive 640x480 resolution and 25 Micron Pitch. The Heavy Thermal Weapon Sight weighs in at only 3 lbs 8 oz and... Read More
 

    The COTI imager enhances the user’s current night vision capabilities by adding a thermal overlay or ‘fused’ image without changing equipment. This helps the user identify if a vehicle was just used or if people were in a room. This system can also see into dark openings such as doorways or windows and help perform search and rescue missions. The Clip-on Thermal Imager, is the most versatile thermal system. Use alone as a hand, head or weapon mounted thermal system or ‘clip’ onto an existing night vision device to create a fused image of night vision and thermal together.  Read More

Home | Contact Us | About KERIF |  Export Regulations | How to Order

(702) 324-6463  /  (702) 869-8451 FAX  

sales@nitevis.com or kerifnightvision@earthlink.net