|How to Order|
ELCAN Optical Technologies is the mission leader with a complete range of battle-tested, premium quality rifle sights in visible and thermal (IR) weapon sights. ELCAN has now combined a complete family of sights under the ELCAN Specter and PhantomIR product lines.
ELCAN SpecterDR® DFOV156 (1.5X - 6X) a revolutionary optical design that combines the best of close and precision fire ranged combat features into a single, low profile Dual Field-Of-View (DFOV) sight.
Compatible with Night Vision Devices Read more...
- 4X) DFOV14-C1
(5.56) / DFOV14-C2 (7.62)
... a one of a kind CQB (1x - 4X) optical design that combines the best of close and precision fire ranged combat features into a single, low profile Dual Field-Of-View (DFOV) sight. Compatible with Night Vision Devices Read more...
Military ONLY SOF over-run. With its Dual-Role capability, comes with an
integrated LED that
illuminates just the center in Red Dot (1.5 MOA) 1X mode
and lets soldiers move safely through buildings or
confined areas, and then switch instantly to (4X),
illuminating the entire ...
Compatible with Night Vision Devices Read more...
FLIR T-90 TaNS The MilSight™ T90 TaNS® (Tactical Night Sight®) is a High-Resolution Clip-On Night Vision Device (CNVD) that mounts on any Picatinny (MIL-STD-1913) rail interface forward of an existing scope, adding night vision capabilities to daytime target acquisition platforms. Read more...
CQB-001-A7 CNVD-T™ (SU-232/PAS) L-3 Insight Technology's Clip-on Thermal Sight is a lightweight, multi-platform thermal imager, providing moving man-sized target detection performance over 500 meters. The CNVD-T can be weapon-mounted as a stand-alone night vision sight or in combination with existing day optics. Insight's CQB-001-A7 Thermal Night Vision Device CNVD-T's small size also makes it ideal for hand-held use... Read more...
CNVD-T3 is a battery operated, weapon-mounted, thermal imaging device with
an integrated digital camera. It may be used in conjunction with other
optical sights, or as a handheld unit. It allows for observation, target
identification, and target acquisition during the day or in adverse conditions
such as light rain or snow, dry smoke, and low light to total darkness.
M2124 CNVD-LR™ (AN/PVS-27 Style) The advanced design of the M2124 Clip On Night Vision Device (Long Range) eliminates the typical requirement of removing a primary (day) sighting system since the CNVD-LR mounts in line with a standard day optical sight. Combining day and night vision sights eliminates the need to re-zero, since the primary sight remains undisturbed ... Read more...
M2124 CNVD™ (AN/PVS-24 Style) Significant design improvements will show itself the first time you use it, as the M2124 is based on the military nomenclature AN/PVS-24, extensively used by US Special Operations Forces to gain the advantage at night without sacrificing their existing Day Scopes. No more having to remove your expensive dedicated day scope ... Read more...
AN/PVS-4 The AN/PVS-4 and the larger Objective AN/TVS-5 mounts on virtually any assault or sporting firearm, as well as to both video and photographic cameras for unmatched cost-effectiveness. You can use our Photo Adapter to connect it to a 35mm SLR's step-up ring--no need for a costly relay lens assembly for 35mm photography. Read more...
Aurora 8010/ITTF7201/VM56 Dayscope/Nightscope The Most Versatile System Available! It is no longer necessary to maintain a dedicated Night Vision weapon and a dedicated Day Weapon system. This Generation 3 device is ready for use 24 hours a day. When light levels get low enough that use of the day scope is prohibited.... Read more...
Using only 3 CR123 batteries and weighing only 2.4 lbs, the Zebra MK2-A TWS - Thermal Weapon Sight features a 160 x 120 uncooled microbolometer with a crisp 640 x 480 output video resolution that is refreshed at a 30 Hz frame rate ... Read More...
6X Aquila® (AN/PVS-12/12A Type) Utilizes high strength aluminum housing for rugged environments, this 6X Power, Gen III scope delivers up to 60 hours of continuous operation. With an adjustable projected reticle developed primarily for use on 5.56 and 7.62 caliber weapons, and a 5.7° FOV (same as Raptor) you can be sure to see what goes bump in the night. Both the Windage and ... Read more...
4X Raptor® Based on the same design features but in smaller, and much lighter 4X Magnification, Gen III, Duplex Reticle, 8.3° FOV, Bright Source Protection, can withstand the recoil of most weapons including .50 cal. This is the Weaponsight of choice for most Hog Hunters, Sportsman and Varmint Hunters because of its smaller design. The 4X Raptor gives you more than enough range and clarity to get the job done right! Read more...
Designed as a
lighter and more compact replacement for the 3.4x series of rifle
sights, the SpecterOS features internal
zeroing adjustment (in the optical assembly, rather than in the
mount assembly) and models are supplied with either a M16 Handle or
Picatinny "Flat Top" Mount.
Aimpoint is recognized as a worldwide leader and originator of the
red dot sighting technology. After more than 30 years of working
closely with military weapon systems experts, experienced hunters
and marksmen around the world, Aimpoint sights remain the top choice
for combining speed and accuracy. Aimpoint sights have been used by
hunters around the world to take virtually every type of game. From
Cape buffalo in Africa to Kodiak bear in Alaska.
L-3 EOTech designs and manufactures electro-optic products and systems. They use advanced laser and holographic technology to enhance optical devices in target acquisition systems and recreational sport optics. EOTech invented, designed, and manufactures the Holographic Weapon Sight (HWS) - the world's first holographic sighting system for small and medium-sized weapon platforms.
WarriorIR Intermediate Thermal Weaponsight ITWS Discontinued***
The WarriorIR™ with MicroIR™ technology is a Thermal Weaponsight designed for a variety of weapon platforms. This gives the shooter a true 24 hour all weather sighting capability in all conditions. This system has been extensively field-tested by the Dismounted Battlespace Battle Labs at Fort Benning and various field units.
(702) 324-6463 / (702) 869-8451 FAX